From 962c35425636e3f942fd8a624369a7c53748f47e Mon Sep 17 00:00:00 2001
From: Azat Bahawi <azat@bahawi.net>
Date: Thu, 1 Jan 1970 03:00:00 +0300
Subject: chore: init

---
 etc/thinkfan.conf | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 107 insertions(+)
 create mode 100644 etc/thinkfan.conf

(limited to 'etc/thinkfan.conf')

diff --git a/etc/thinkfan.conf b/etc/thinkfan.conf
new file mode 100644
index 0000000..1784896
--- /dev/null
+++ b/etc/thinkfan.conf
@@ -0,0 +1,107 @@
+######################################################################
+## thinkfan 0.9 example config file
+## ================================
+##
+## ATTENTION: There is only very basic sanity checking on the configuration.
+## That means you can set your temperature limits as insane as you like. You
+## can do anything stupid, e.g. turn off your fan when your CPU reaches 70°C.
+##
+## That's why this program is called thinkfan: You gotta think for yourself.
+##
+#######################################################################
+##
+## This file shows how to use sensor-specific temperature limits.
+## First of all, you need to specify temperature inputs. On a Thinkpad, you can
+## just use:
+##
+#tp_thermal /proc/acpi/ibm/thermal  # provides us with 16 temperature inputs
+
+##
+## On other systems, you have to specify a file in /sys/class/hwmon for each
+## sensor you want to use. They are numbered in their order of appearance.
+## For example:
+#
+# hwmon /sys/class/hwmon5/temp2_input           #1
+# hwmon /sys/class/hwmon0/device/temp3_input    #2
+#
+## If you want to read temperatures directly from the hard disk, thinkfan needs
+## to be compiled with -DUSE_ATASMART. Then you can do:
+#
+# atasmart /dev/sda                             #3
+# ...
+#
+## You can have as many temperature inputs as you like. You should at get the
+## temperature from the CPU, the GPU and the hard disk.
+#
+hwmon /sys/devices/platform/coretemp.0/hwmon/hwmon1/temp1_input
+hwmon /sys/devices/platform/coretemp.0/hwmon/hwmon1/temp2_input
+hwmon /sys/devices/platform/coretemp.0/hwmon/hwmon1/temp3_input
+
+#
+## Next we specify the fan we want to use. On a Thinkpad, this is:
+#
+tp_fan /proc/acpi/ibm/fan
+
+#
+## On anything other than a Thinkpad you'll probably use some PWM control file
+## in /sys/class/hwmon. Remember that fan levels range from 0 to 255 and that
+## they're just a number, not including the word "level" as seen below.
+## A sysfs fan would be specified like this:
+#
+# pwm_fan /sys/class/hwmon/hwmon2/device/pwm1
+#
+## But remember you can only have one fan.
+
+#
+## Then you need to specify the temperature limits for each of the sensors.
+## A dot means that the corresponding sensor should be ignored. The length of the
+## UPPER and LOWER limits must be the same as the number of temperatures. In this
+## example, /proc/acpi/ibm/thermal contains 16 sensors (on older thinkpads,
+## there may be only 8), some of which are unused (hence the dots).
+## A sysfs temperature input always contains only one sensor, so if you specify
+## 5 sysfs files above, the length of your limits must be 5, too.
+#
+## I've come up with these preliminary settings for my Thinkpad T61p. They probably
+## don't make sense for anything else, so you most definitely have to work
+## something out for yourself.
+#
+{ "level 0"   # the fan level
+# ^-------^   This works for /proc/acpi/ibm/thermal.
+#             for a PWM fan in /sys/class/hwmon it would have to be just
+#             0 or "0".
+#
+#    Sensor count:
+#    1  2  3  4  5  6  7  8  9  10 11 12 13 14 15 16
+#    ==============================================
+    (0  0  0  0  0  0  0  0  0  0  0  0  0  0  0  0)      # LOWER limit
+    (54 42 42 54 42 .  42 .  42 46 54 .  .  .  .  .)      # UPPER limit
+}
+
+{ "level 1"
+# ^-------^ For a PWM fan you may have to use something around 30 to get the
+# same speed.
+    (46 39 39 48 39 .  39 .  41 44 46 .  .  .  .  .)
+    (58 45 45 60 45 .  45 .  45 47 56 .  .  .  .  .)
+}
+
+{ "level 3"
+    (52 43 43 57 43 .  43 .  43 45 51 .  .  .  .  .)
+    (62 48 48 67 48 .  48 .  48 48 57 .  .  .  .  .)
+}
+
+{ "level 5"
+    (56 46 46 65 46 .  46 .  46 46 52 .  .  .  .  .)
+    (66 49 49 69 49 .  49 .  49 49 58 .  .  .  .  .)
+}
+
+{ "level 7"
+    (63 47 47 67 47 .  47 .  47 47 50 .  .  .  .  .)
+    (73 55 55 83 60 .  60 .  60 60 64 .  .  .  .  .)
+}
+
+{ "level disengaged" # nice idea: "level auto" can also be used.
+                     # but again: only numbers for sysfs.
+    (69 50 50 75 55 .  55 .  55 55 55 .  .  .  .  .)
+    (99 99 99 99 99 .  99 .  99 99 99 .  .  .  .  .)
+}
+
-- 
cgit 1.4.1