diff options
| author | Azat Bahawi <azat@bahawi.net> | 1970-01-01 03:00:00 +0300 |
|---|---|---|
| committer | Azat Bahawi <azat@bahawi.net> | 2022-09-20 11:52:07 +0300 |
| commit | 962c35425636e3f942fd8a624369a7c53748f47e (patch) | |
| tree | c69e76f6c4cdd7f9f66d02a02ee683fe4d5426e7 /etc/conf.d/smapi | |
Diffstat (limited to '')
| -rw-r--r-- | etc/conf.d/smapi | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/etc/conf.d/smapi b/etc/conf.d/smapi new file mode 100644 index 0000000..9a6ed94 --- /dev/null +++ b/etc/conf.d/smapi @@ -0,0 +1,20 @@ +# /etc/conf.d/smapi: config file for /etc/init.d/smapi + +# use '/etc/init.d/smapi info' at any time to check the thresholds +# currently used by the driver +# Note that the kernel does some sanity checking on the values and +# will not accept any combination of values you may try to set up. +# (i.e. stop value lower than start) So if the output of info does +# not match what you wanted the driver probably did not like your +# configuration. + +# default thresholds for '/etc/init.d/smapi start' +SMAPI_THRESH_START="0" +SMAPI_THRESH_STOP="100" +# values to be used for '/etc/init.d/smapi low' +SMAPI_LOW_THRESH_START="${SMAPI_THRESH_START}" +SMAPI_LOW_THRESH_STOP="${SMAPI_THRESH_STOP}" + +# values to be used for '/etc/init.d/smapi high' +SMAPI_HIGH_THRESH_START="0" +SMAPI_HIGH_THRESH_STOP="100" |